Valve Products is a representative of high quality pipe, valve and fitting manufacturers. Our products include but are not limited to: High Performance and Resilient Seat Butterfly Valves, AWWA Butterfly Valves, Floating & Trunnion Ball Valves, Thermoplastic Ball & Butterfly Valves, Pneumatic and Electric Actuators, Automated Valve Packages, Gate Globe & Check Valves, Knife Gate Valves, Expansion Joints, Simplex, Duplex, "Y", & Self Cleaning Strainers, PVC, CPVC, & Steel Pipe. We focus on distributors in the Industrial market who service Power Generation, Pulp & Paper, Gas & Gas Transmission, Chemical, Refining, Water & Waste Water, and HVAC plants. Our territory is the Southeastern U.S. and includes: AL, AR, FL, GA, MS, NC, SC, TN and PR.
CS / MS / SS / SS 304 / SS 316 / PP / HDPE / Ball Valve
Offered in different specifications, our PP non return valves flange ends are made using high-quality PP, PVDF material and neoprene rubber. Known for their stress tolerance and surface hardness, these are designed in compliance with ANSI, BS and DIN standards.
Manufactured using high grade polypropylene, our range of PP ball valves thread end are known for stress tolerance, surface hardness and corrosion resistance. We offer these valves in varied sizes and specifications and can also customize as per the specific requirement of the clients.
We are offering Ball Valves in customized design and dimensions as per the exact specifications of the clients. Owing to their quality and high dimensional accuracy, it is widely use in gas sampling & high pressure instrument lines, refineries pilot plants, on/off shore, analyzer labs and pneumatic systems.
Ball_Valve
Brass non Return Valve Verticle
Gun-Metal-Relief-Valve
_2.jpg)
Wafer-Check-Valve
P P Foot Valve Screw
Globe Valve
Our range of products include Globe Valve such as Metal Globe Valve and Cast Steel Globe Valve.
Size: 1/2" to 12" (DN15-DN300)
Class: PN10, PN16
Type: Bolted Bonnet, rising stem, brass/bronze/stainless steel seat ring.
Material: Cast iro, ductile iron
Operation: Hand whee
Gate Valve
We are offering Gate Valves in customized design and dimensions as per the exact specifications of the clients. Owing to their quality and high dimensional accuracy, it is widely use in gas sampling & high pressure instrument lines, refineries pilot plants, on/off shore, analyzer labs and pneumatic systems.
Wedge Gate, Parallel Slide Gate, Through Conduit Gate and Split Gate Types
Full or Reduced Bore
Rising Stem or Rising Gate
Outside Screw and Yoke (OS&Y)
Manual Handwheel, Chainwheel, Gearbox or Actuator Operated
Operating temperature and fluids suitability - further information on request
Firesafe / Cryogenic / Gas Service certified options
Pinch-Valve
Owing to our enriched industrial experiences, we are devoted towards offering a wide variety of excellent quality Pinch Valve. The provided valve is exclusively manufactured using high grade raw material and the latest technology by our skillful professionals. The offered valve is highly appreciated by our clients owing to its sturdiness and easy-installation. Furthermore, this valve is duly checked against set quality parameters to offer a flawless range.
| Temp. range* | -50°C to 190°C |
| Connections | Clamps |
| Material | Body, connections: 316L |
| Operated | manual or actuator |
Steam Trap
Thermal actuator is filled at its free length with a liquid having a lower boiling point than water. On start-up, the valve is normally open to discharge air, non-condenibles and condensate. When steam enters trap, the thermal actuator fill vaporizes to a pressure higher than line pressure. This forces the valve into seat orfice to prevent any further flow. As condensate collects, it takes heat from the actuator, lowering internal pressure. The line pressure will then compress thermal actuator to open the valve and discharge the condensate. Valve opening automatically adjusts to load conditions from minimum on very light loads to full lift at maximum load.
Trap is designed to be self draining for vertical installation. For horizontal trap see: series CDH.
SE Steam Trap
Inverted Bucket Steam Trap
Safety Valve
Safety valves and relief valves are so designed so that the disc lifts automatically when the inner pressure rises to a set pressure, and then closes when the pressure level drops to a predetermined value.
We offer a diverse lineup that supports various fluid types including steam, gas, water, and more.
Specifications:
- Setting Pressure Range: 5-30 Kgf/ cm2
- Full Operating Pressure: set Pressure: 10%
- Resetting Pressure: Set Pressure: 10%
- Temperature Range: -20C to 250C
- Thread Size: 3 / 4",1",1 1 / 4",1 1 / 2" BSP/BSPT/NPT
Main Steam Relief Valve
